NSN 5315-00-335-4710 · NIIN 003354710 · FSC 5315
NO DASHES 5315003354710
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.800 AND INCHES MAXIMUM 0.820 |
| AATR | SHANK LENGTH | INCHES MINIMUM 1.050 AND INCHES MAXIMUM 1.070 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.312 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 5.300 AND INCHES MAXIMUM 5.320 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 1010 OR STEEL COMP B1112 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE AISI OR ASSN STD 2ND MATERIAL RESPONSE AISI 1211 |
| CRDY | FIRST END LOCATION | SHORT SHANK END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 60.0 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJD | THREAD CLASS | 3A |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.316 AND INCHES MAXIMUM 0.319 |
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 2.550 AND INCHES MAXIMUM 2.570 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.068 AND INCHES MAXIMUM 0.088 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.180 |