NSN 5315-00-356-3506 · NIIN 003563506 · FSC 5315
NO DASHES 5315003563506
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRDY | FIRST END LOCATION | BOTH ENDS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE KL1-F1101,FSC- 82423 |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | FLAT0.250 IN. LG BY 0.156 IN. DEEP 0.125 IN. IN FROM OPPOSITE END OF GROOVE |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | SMALL END MICROINCHES 32.0 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.010 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.032 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.349 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.147 AND INCHES MAXIMUM 0.149 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.469 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.1855 AND INCHES MAXIMUM 0.1870 |
| AAGZ | FIRST END STYLE |