NSN 5315-00-469-5338 · NIIN 004695338 · FSC 5315
NO DASHES 5315004695338
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | 10-32UNF THREADED HOLE 0.210 IN. MIN 0.230 IN. MAX THRU SHOULDER FROM BEARING SURFACE,0.093 IN. DIA HOLE DRILLED THRU CENTER OF THREADED HOLE ANGLE BETWEEN CENTERLINE OF HOLES 90.0 DEG,0.078 IN. DIA HOLE DRILLED THRU SHANK PARALLEL TO THREADED HOLE 0.370 IN. MIN 0.380 IN. MAX FROM SHOULDER BEARING SURFACE |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 15.0 |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.525 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.375 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | SHANK END |
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.930 AND INCHES MAXIMUM 0.950 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.020 AND INCHES MAXIMUM 0.040 |
| STYL | STYLE DESIGNATOR | |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.248 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 30.020-00 FSC- 15434 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 102483 | 15434 |