NSN 5315-00-492-6534 · NIIN 004926534 · FSC 5315
NO DASHES 5315004926534
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2498 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 32.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.240 |
| CRDY | FIRST END LOCATION | SHORT SHANK END |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.240 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.188 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.375 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-F-14072,E300 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.590 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.015 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CQTR | SECOND SHANK DIAMETER | INCHES NOMINAL 0.190 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | 0.046 IN. W BY 0.139 IN. DIA THREAD RELIEF,0.030 IN. W BY 0.210 IN DFIA ANNULAR RELIEF ON LARGER DIA SHANK AT SHOULDER END AND 0.042 IN. W BY 0.365 IN. DIA WASHER FACE ON LARGE DIA SHANK SIDE OF SHOULDER |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,COND A |
| AAJD | THREAD CLASS | 2A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 135225-1 | 37695 |