NSN 5315-00-494-1857 · NIIN 004941857 · FSC 5315
NO DASHES 5315004941857
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.077 AND INCHES MAXIMUM 0.087 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.030 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| AAGZ | FIRST END STYLE | |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.590 AND INCHES MAXIMUM 0.610 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1871 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.220 AND INCHES MAXIMUM 1.240 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.070 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 40.0 AND DEGREES MAXIMUM 50.0 |
| FEAT | SPECIAL FEATURES | 40.0 MIN 50.0 MAX DEG CHAMFER ON BEARING SURFACE OF SHOULDER |
| MATT | MATERIAL | OVERALL STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5613 |
| STYL | STYLE DESIGNATOR |