NSN 5315-00-582-1521 · NIIN 005821521 · FSC 5315
NO DASHES 5315005821521
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.031 |
| MATT | MATERIAL | OVERALL STEEL COMP W110 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-T-18291,CLASS W1-NDR |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 40.0 AND DEGREES MAXIMUM 50.0 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 0.755 AND INCHES MAXIMUM 0.760 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.2285 AND INCHES MAXIMUM 0.2315 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL--16232,TY 1 |
| STYL | STYLE DESIGNATOR | |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.031 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.021 AND INCHES MAXIMUM 0.041 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL BRINELL HULTGREN MINIMUM 265.0 AND BRINELL HULTGREN MAXIMUM 290.0 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 32.0 |
| AAGZ | FIRST END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.927 AND INCHES MAXIMUM 0.947 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1591437 | 10001 |