NSN 5315-00-610-8300 · NIIN 006108300 · FSC 5315
NO DASHES 5315006108300
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.498 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.050 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 0.750 |
| ABPF | SECOND UNDERCUT DIAMETER | INCHES NOMINAL 0.548 |
| ABPG | SECOND UNDERCUT RADIUS | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.060 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| ABQX | HEAD WIDTH | INCHES NOMINAL 0.630 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.193 AND INCHES MAXIMUM 0.198 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 1.800 |
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.556 AND INCHES MAXIMUM 0.561 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5626 |
| STYL | STYLE DESIGNATOR | |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 2.090 AND INCHES MAXIMUM 2.130 |
| ABPE | UNDERCUT RADIUS | INCHES NOMINAL 0.500 |
| HGTH | HEIGHT | INCHES NOMINAL 0.150 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.