NSN 5315-00-663-3181 · NIIN 006633181 · FSC 5315
NO DASHES 5315006633181
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 0.842 AND INCHES MAXIMUM 0.846 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.097 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.017 AND INCHES MAXIMUM 0.019 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| STYL | STYLE DESIGNATOR | |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 32.0 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.020 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.125 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.017 AND INCHES MAXIMUM 0.019 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 52703 | 82423 |
Supersedes
This item replaces cancelled NIIN 007031593. An older drawing citing one of those numbers resolves here.