NSN 5315-00-664-1943 · NIIN 006641943 · FSC 5315
NO DASHES 5315006641943
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.368 AND INCHES MAXIMUM 0.375 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.905 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6050 COND F4 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.822 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.775 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.875 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.311 AND INCHES MAXIMUM 0.312 |
| CRDY | FIRST END LOCATION | SHANK END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| AAGZ | FIRST END STYLE | |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.680 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.060 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.080 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 761104 | 98897 |