NSN 5315-00-696-2634 · NIIN 006962634 · FSC 5315
NO DASHES 5315006962634
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.030 |
| CSYM | SURFACE FINISH | LONG SHANK MICROINCHES 63.0 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.049 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 1.261 AND INCHES MAXIMUM 1.274 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.773 AND INCHES MAXIMUM 0.779 |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 1.410 |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | ONE HOLE 0.562 IN. MIN 0.567 IN. MAX THROUGH THE LONGITUDINAL CENT34 |
| HGTH | HEIGHT | INCHES NOMINAL 0.120 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 OR STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-675 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6050 |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES NOMINAL 0.460 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 1.060 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.8100 AND INCHES MAXIMUM 0.8105 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 4-80630 | 82918 |