NSN 5315-00-707-4665 · NIIN 007074665 · FSC 5315
NO DASHES 5315007074665
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.031 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.031 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STYL | STYLE DESIGNATOR | |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| AAGZ | FIRST END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.030 AND INCHES MAXIMUM 4.090 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.250 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 3.615 AND INCHES MAXIMUM 3.635 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.210 AND INCHES MAXIMUM 0.212 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 44.5 AND DEGREES MAXIMUM 45.5 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.022 AND INCHES MAXIMUM 0.042 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11242-1 | 92802 |