NSN 5315-00-739-3317 · NIIN 007393317 · FSC 5315
NO DASHES 5315007393317
In Stock
PIN,SHOULDER,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPV | THIRD STEP DIAMETER | INCHES MINIMUM 0.0835 AND INCHES MAXIMUM 0.0840 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.030 |
| AAGZ | FIRST END STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 50.0 |
| HGTH | HEIGHT | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.070 |
| MATT | MATERIAL | OVERALL STEEL COMP 615 |
| ABPW | THIRD STEP LENGTH | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.242 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| CSYM | SURFACE FINISH | LARGE SHANK MICROINCHES 10.0 |
| ABPU | SECOND STEP LENGTH | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.180 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 0.460 AND INCHES MAXIMUM 0.480 |
| ABPR | FIRST STEP DIAMETER | INCHES MINIMUM 0.179 AND INCHES MAXIMUM 0.181 |
| ABPS | FIRST STEP LENGTH | INCHES MINIMUM 0.062 AND INCHES MAXIMUM 0.072 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.1395 AND INCHES MAXIMUM 0.1400 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | 0.015 IN.MIN 0.025 IN. MAX WIDE,0.044 IN.MIN 0.056 IN. MAX DEEP GRINDING RELIEF UNDER HEAD ON FIRST SHOULDER AND 0.033 IN.MIN 0.037 IN. MAX HOLE THRU SHOULDER 0.082 IN. MIN 0.102 IN. MAX FROM CENTERLINE OF HOLE TO END |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 43.0 AND DEGREES MAXIMUM 47.0 |