NSN 5315-00-740-3905 · NIIN 007403905 · FSC 5315
NO DASHES 5315007403905
In Stock
PIN,SHOULDER,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRB | HOLE ARRANGEMENT STYLE | |
| STYL | STYLE DESIGNATOR | |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.1235 AND INCHES MAXIMUM 0.1240 |
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| ABPR | FIRST STEP DIAMETER | INCHES MINIMUM 0.175 AND INCHES MAXIMUM 0.181 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.033 AND INCHES MAXIMUM 0.037 |
| MATT | MATERIAL | OVERALL STEEL COMP 615 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.102 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.030 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 43.0 AND DEGREES MAXIMUM 47.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 |
| CSYM | SURFACE FINISH | LARGE SHANK MICROINCHES 10.0 |
| HGTH | HEIGHT | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.070 |
| ABPU | SECOND STEP LENGTH | INCHES NOMINAL 0.678 |
| FEAT | SPECIAL FEATURES | FIRST STEP FLAT 0.140 IN. ACROSS |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| ABPS | FIRST STEP LENGTH | INCHES MINIMUM 0.078 AND INCHES MAXIMUM 0.0821 |