NSN 5315-00-741-4438 · NIIN 007414438 · FSC 5315
NO DASHES 5315007414438
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.428 AND INCHES MAXIMUM 2.448 |
| AAGZ | FIRST END STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.3040 AND INCHES MAXIMUM 0.3050 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 2.314 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.285 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.036 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.036 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 12.0 |
| FEAT | SPECIAL FEATURES | 0.125 IN. DIA CENTER DRILLED BOTH ENDS |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-689 OR FED SPEC SINGLE MATERIAL RESPONSE AN-QQ-S-690 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.006 AND INCHES MAXIMUM 0.026 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 44.5 AND DEGREES MAXIMUM 45.5 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7414438 | 19207 |
| 405391 | 56705 |
| 405391 | 59364 |
| 405391 | 70236 |
| 405391 | 77068 |
| 405391 | 78062 |
| 5315PL0700268 | 9009H |
| 21899-1002-1 | 97613 |
| 405391 | A0126 |
| 405391 | 06840 |
Supersedes
This item replaces cancelled NIIN 004744464. An older drawing citing one of those numbers resolves here.