NSN 5315-00-741-4439 · NIIN 007414439 · FSC 5315
NO DASHES 5315007414439
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.943 AND INCHES MAXIMUM 0.963 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.031 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.031 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.362 AND INCHES MAXIMUM 0.365 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 0.760 AND INCHES MAXIMUM 0.770 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 4820H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624,CO- 4820H |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 1 |
| FEAT | SPECIAL FEATURES | 0.125 IN. DIA CENTER DRILLED BOTH ENDS AND CENTER GROOVE 0.625 IN. WIDTH 0.435 TO 0.455 IN. LG FROM ENDS |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.005 AND INCHES MAXIMUM 0.025 |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 12.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| AAGZ | FIRST END STYLE | |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.344 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 45.0 |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| CRDY | FIRST END LOCATION | BOTH ENDS |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 004744465. An older drawing citing one of those numbers resolves here.