NSN 5315-00-785-6717 · NIIN 007856717 · FSC 5315
NO DASHES 5315007856717
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.343 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.015 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 42.0 |
| AAGZ | FIRST END STYLE | |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.892 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.039 AND INCHES MAXIMUM 0.043 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 1.028 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 16.0 |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES NOMINAL 0.437 |
| STYL | STYLE DESIGNATOR | |
| HGTH | HEIGHT | INCHES NOMINAL 0.070 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| FEAT | SPECIAL FEATURES | 0.250 IN. DIA HOLE DRILLED THRU SHANK LONGITUDINAL TO AXIS TAPPED 1/4-20 UNC 0.530 IN. DEEP AT HD END,0.080 IN. DIA HOLE DRILLED IN SHANK 0.827 IN. FROM BEARING SURFACE OF HD |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 2.085 |