NSN 5315-00-801-7255 · NIIN 008017255 · FSC 5315
NO DASHES 5315008017255
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.020 |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.074 AND INCHES MAXIMUM 0.080 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.173 AND INCHES MAXIMUM 0.179 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.0892 AND INCHES MAXIMUM 0.0897 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.0792 AND INCHES MAXIMUM 0.0797 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.032 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES NOMINAL 0.032 |
| ABPF | SECOND UNDERCUT DIAMETER | INCHES MINIMUM 0.0792 AND INCHES MAXIMUM 0.0797 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAGZ | FIRST END STYLE | |
| CRDY | FIRST END LOCATION | LONG END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 15.0 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 0.284 AND INCHES MAXIMUM 0.290 |
| MATT | MATERIAL | OVERALL STEEL COMP 416F |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5610 |
| STYL | STYLE DESIGNATOR | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.464 |
| AAHP | SECOND END STYLE | |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.0572 AND INCHES MAXIMUM 0.0577 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 188600 | 06848 |