NSN 5315-00-805-5812 · NIIN 008055812 · FSC 5315
NO DASHES 5315008055812
In Stock
PIN,STRAIGHT,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 1.460 AND INCHES MAXIMUM 1.480 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.124 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.091 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
| STYL | STYLE DESIGNATOR | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| HGTH | HEIGHT | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.062 |
| MATT | MATERIAL | OVERALL STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 6300 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6050 |
| CQPJ | PIN CHAMFER ANGLE | DEGREES MINIMUM 14.5 AND DEGREES MAXIMUM 15.5 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| AASK | HEAD STYLE | |
| ABRB | HOLE ARRANGEMENT STYLE | |
| AAZP | CHAMFER LENGTH | INCHES NOMINAL 0.046 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILP5673 | 81349 |
| AN392-43 | 88044 |
| MS20392-1-43 | 96906 |
Supersedes
This item replaces cancelled NIIN 002351141. An older drawing citing one of those numbers resolves here.