NSN 5315-00-806-7040 · NIIN 008067040 · FSC 5315
NO DASHES 5315008067040
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE AST- A493 OR ASSN STD 2ND MATERIAL RESPONSE AST- A582 |
| AAHP | SECOND END STYLE | |
| ACHT | PIN OVERALL LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE AST- A380 |
| AAGZ | FIRST END STYLE | |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.0939 AND INCHES MAXIMUM 0.0941 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.103 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQSX | SHEAR STRENGTH | DOUBLE POUND 1000 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 4.0 AND DEGREES MAXIMUM 16.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 16.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 410 OR STEEL COMP 416 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NASM16555-620 | 80205 |
| MS16555-620 | 80205 |
| MILP21143 | 81349 |
| 5315PL0949042 | 9009H |
| MS16555-620 | 96906 |
| 1622294-1 | 99251 |
| 726-00 | D9182 |
| 104A901885 | D9182 |
| 10122717 | A486G |
| D16-500 | 00141 |
| 946339-620 | 06481 |
Supersedes
This item replaces cancelled NIINs 001436240 · 008065315. An older drawing citing one of those numbers resolves here.