NSN 5315-00-830-5162 · NIIN 008305162 · FSC 5315
NO DASHES 5315008305162
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.904 |
| AAGZ | FIRST END STYLE | |
| FEAT | SPECIAL FEATURES | BODY HOLLOWED 0.860 IN. DIA,2.800 IN. DP THEN 0.500 IN. DIA FOR 0.690 IN.; CADMIUM PLATE OD ONLY,SHOT PEEN AND CHROME PLATE BOTH ENDS |
| MATT | MATERIAL | OVERALL STEEL |
| CRDY | FIRST END LOCATION | SHOULDER END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 125.0 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.254 AND INCHES MAXIMUM 0.256 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 1.628 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.060 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMIUM |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.2485 AND INCHES MAXIMUM 1.2495 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.9985 AND INCHES MAXIMUM 0.9995 |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7108,C1 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.000 |
| ABRB | HOLE ARRANGEMENT STYLE |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.