NSN 5315-00-862-7999 · NIIN 008627999 · FSC 5315
NO DASHES 5315008627999
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHP | SECOND END STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5626STYLLL116 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 43.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 5.0 AND DEGREES MAXIMUM 10.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 32.0 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.272 AND INCHES MAXIMUM 0.273 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.583 AND INCHES MAXIMUM 0.593 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.373 AND INCHES MAXIMUM 0.374 |
| CRDY | FIRST END LOCATION | UNTHREADED END |
| FEAT | SPECIAL FEATURES | SECOND END COUTERSUNK 0.156 IN. MJM,0.164 IN. MAX DIA; 0.210 IN. DEEP THREADED 10-32NF-2B 0.190 IN DEEP |
| AAGZ | FIRST END STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.095 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.130 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |