NSN 5315-00-869-0697 · NIIN 008690697 · FSC 5315
NO DASHES 5315008690697
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.030 |
| MATT | MATERIAL | OVERALL STEEL COMP 1118 |
| AAGZ | FIRST END STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| STYL | STYLE DESIGNATOR | |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 63.0 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.800 AND INCHES MAXIMUM 0.820 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.1248 AND INCHES MAXIMUM 0.1251 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 0.760 AND INCHES MAXIMUM 0.770 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 53.0 AND ROCKWELL C MAXIMUM 60.0 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.050 |
| ABPE | UNDERCUT RADIUS | INCHES MAXIMUM 0.005 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 43.0 AND DEGREES MAXIMUM 47.0 |