NSN 5315-00-923-5396 · NIIN 009235396 · FSC 5315
NO DASHES 5315009235396
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.227 AND INCHES MAXIMUM 0.228 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130H |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.125 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.3134 AND INCHES MAXIMUM 0.3136 |
| STYL | STYLE DESIGNATOR | |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.016 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 35.0 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 0.965 |
| CSYM | SURFACE FINISH | SMALL END MICROINCHES 32.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL--16232,TY -,CL 1 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 10.0 AND DEGREES MAXIMUM 15.0 |
| FEAT | SPECIAL FEATURES | THRU HOLE THD ON GROOVED END 6-32 UNC 2B 0.310 IN. MIN 0.373 IN. MAX LG,WITH RETAINING RING |
| AAGZ | FIRST END STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.052 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2122701-38 | 44114 |
| 5315PL0865366 | 9009H |
| PL2122701-38 | D9182 |
| 2122703-38 | 10001 |
| 2122701-38 | 10001 |