NSN 5315-00-923-5443 · NIIN 009235443 · FSC 5315
NO DASHES 5315009235443
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 32.0 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.395 AND INCHES MAXIMUM 0.396 |
| FEAT | SPECIAL FEATURES | 0.261 IN. DIA THRU HOLE THD ON GROOVED END 1/4-20 UNC 2B 0.532 IN. MIN 0.592 IN. MAX LG,WITH RETAINING RING |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.016 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 35.0 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.5001 AND INCHES MAXIMUM 0.5003 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.250 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL--16232,TY -,CL 1 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130H |
| AAGZ | FIRST END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.500 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.064 |
| STYL | STYLE DESIGNATOR | |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 10.0 AND DEGREES MAXIMUM 15.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2122700-145 | 44114 |
| 5315PL0889155 | 9009H |
| PL2122700-145 | D9182 |
| 2122702-145 | 10001 |
| 2122700-145 | 10001 |