NSN 5315-01-015-7808 · NIIN 010157808 · FSC 5315
NO DASHES 5315010157808
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.870 |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 1.031 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.125 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.031 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 60.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 1.373 AND INCHES MAXIMUM 1.375 |
| CSYM | SURFACE FINISH | LARGE SHANK MICROINCHES 32.0 |
| HGTH | HEIGHT | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.250 |
| MATT | MATERIAL | OVERALL STEEL COMP 1117 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 1 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 63B52567-7 | 98750 |