NSN 5315-01-019-1114 · NIIN 010191114 · FSC 5315
NO DASHES 5315010191114
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.310 AND INCHES MAXIMUM 1.330 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.717 AND INCHES MAXIMUM 0.718 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.160 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.530 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.090 |
| ABPE | UNDERCUT RADIUS | INCHES NOMINAL 0.040 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.040 AND INCHES MAXIMUM 0.060 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CRDY | FIRST END LOCATION | CHAMFERED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | HAS 0.375 IN. DIA,1.000 IN. DP HOLE CENTERED IN CHAMFERED END |
| MATT | MATERIAL | OVERALL STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5613 |
| SFTT | SURFACE TREATMENT | OVERALL CHROMIUM |
| STYL | STYLE DESIGNATOR |