NSN 5315-01-019-2541 · NIIN 010192541 · FSC 5315
NO DASHES 5315010192541
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ACHT | PIN OVERALL LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.1876 AND INCHES MAXIMUM 0.1878 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 4000 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 20.0 AND DEGREES MAXIMUM 30.0 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 16.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES MINIMUM 4.0 AND DEGREES MAXIMUM 12.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 012685631 · 012570831. An older drawing citing one of those numbers resolves here.