NSN 5315-01-019-6975 · NIIN 010196975 · FSC 5315
NO DASHES 5315010196975
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.373 AND INCHES MAXIMUM 0.374 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 1.075 AND INCHES MAXIMUM 1.085 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.354 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 1.155 AND INCHES MAXIMUM 1.165 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.031 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.020 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 160000 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 0.500 |
| CSYM | SURFACE FINISH | LARGE SHANK MICROINCHES 63.0 |
| HGTH | HEIGHT | INCHES NOMINAL 0.070 |
| MATT | MATERIAL | OVERALL STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| STYL | STYLE DESIGNATOR |