NSN 5315-01-037-4702 · NIIN 010374702 · FSC 5315
NO DASHES 5315010374702
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ACHT | PIN OVERALL LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.1259 AND INCHES MAXIMUM 0.1261 |
| ALWS | SECOND END CORNER RADIUS | INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.047 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.158 |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 2600 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 4.0 AND DEGREES MAXIMUM 12.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 16.0 |
| CSYM | SURFACE FINISH | BOTH ENDS MICROINCHES 125.0 |
| FEAT | SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 20 DEG MIN,30 DEG MAX; CASE HARDNESS OF 60 HRC MINIMUM; CORE HARDNESS SHALL NOT AT ANY TIME EXCEED THE CASE HARDNESS; CORE HARDNESS OF 47-58 HRC |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NASM16556 | 80205 |
| MS16556-828 | 80205 |
| MS16556-828 | 96906 |
| 10400000606 | K0967 |