NSN 5315-01-076-5099 · NIIN 010765099 · FSC 5315
NO DASHES 5315010765099
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.194 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.180 |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 2.500 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.080 AND INCHES MAXIMUM 0.090 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.150 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 14.0 AND DEGREES NOMINAL 16.0 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.320 AND INCHES MAXIMUM 0.360 |
| FEAT | SPECIAL FEATURES | ULTIMATE TENSILE STRENGTH TO BE 65000 PSI MAX |
| HGTH | HEIGHT | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ-N-290 CL 1 GR C |
| STYL | STYLE DESIGNATOR |