NSN 5315-01-111-6812 · NIIN 011116812 · FSC 5315
NO DASHES 5315011116812
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ACHT | PIN OVERALL LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.1251 AND INCHES MAXIMUM 0.1253 |
| ALWS | SECOND END CORNER RADIUS | INCHES MAXIMUM 0.041 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.065 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQSX | SHEAR STRENGTH | DOUBLE POUND 1800 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 4.0 AND DEGREES MAXIMUM 16.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZW AND FEAT |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 16.0 |
| FEAT | SPECIAL FEATURES | CERTIFIED FREE FROM MERCURY CONTAMINATION,SMALL CHAMFER END MAY BE 0.016 IN. MIN 0.041 IN. MAX RADIUS IN LIEU OF CHAMFER |
| MATT | MATERIAL | OVERALL STEEL COMP 410 OR STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE AST- A493 OR ASSN STD 2ND MATERIAL RESPONSE AST- A582 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE AST- A380 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 064-6260-99 | 26840 |
| MS16555-625 | 96906 |