NSN 5315-01-130-7865 · NIIN 011307865 · FSC 5315
NO DASHES 5315011307865
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.400 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.440 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.625 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2550 AND INCHES MAXIMUM 0.2560 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.070 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.040 AND INCHES MAXIMUM 0.070 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.230 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.2435 AND INCHES MAXIMUM 0.2500 |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSGL | SECOND END TIP RADIUS | INCHES NOMINAL 0.060 |
| CSYM | SURFACE FINISH | SHORT SHANK END MICROINCHES 63.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES MINIMUM 39.5 AND DEGREES MAXIMUM 40.5 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.530 |
| FEAT | SPECIAL FEATURES | DRY FILM LUBRICANT ON SHANK PORTION |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-T-9047 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 68A870638-2003 | 6N016 |
| 68A870638-2003 | 76301 |
| 10123019 | A486G |
| 68A870638-2003 | 13539 |