NSN 5315-01-141-7940 · NIIN 011417940 · FSC 5315
NO DASHES 5315011417940
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.405 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.530 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.438 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.030 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.250 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| CRDY | FIRST END LOCATION | SQUARE END |
| CSGL | SECOND END TIP RADIUS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.500 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-T-9047 6AL-4V |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M943T4-2-2 | 56878 |
| 3M943T4-2-2 | 56946 |
| 11415T4-2-2 | 59563 |
| 3M943T4-2-2 | 5M902 |
| 3M943T4-2-2 | 73197 |
| 3M943T4-2-2 | 76301 |
| AAP139T4-2-2 | 84256 |
| VS3258T4-2-2 | 92215 |
| D792683T2N2 | 97928 |
| 10123135 | A486G |
| 3M943T4-2-2 | L4528 |
| 3M943T4-2-2 | K5673 |
| 3M943T4-2-2 | 06725 |
| 3M943T4-2-2 | 0K6Z0 |
| D792683T2N2 | 17446 |