NSN 5315-01-163-6031 · NIIN 011636031 · FSC 5315
NO DASHES 5315011636031
In Stock
PIN,ECCENTRIC
Nails, Machine Keys, and Pins
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.125 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.560 |
| ABNW | OFFSET DISTANCE BETWEEN GEOMETRIC CENTER OF HEAD AND CENTERLINE OF SHANK/SHOULDER | INCHES NOMINAL 0.060 |
| ABNX | RELIEF UNDER HEAD DIAMETER | INCHES NOMINAL 0.250 |
| ABPR | FIRST STEP DIAMETER | INCHES MINIMUM 0.672 AND INCHES MAXIMUM 0.702 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.250 |
| ABQZ | INTERNAL DRIVE STYLE | |
| FEAT | SPECIAL FEATURES | ASSEMBLED WITH A BUSHING,ADJUSTABLE BUSHING AND LOCKING NUT,PANEL THICKNESS 0.177 IN. MIN 0.250 IN. MAX |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6758 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1 CL 2 |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CA4040-6 | 29372 |
| 5165625-2 | 53711 |
| AAP100-40-6 | 84256 |
| CA4040-6 | D0680 |
| CA4040-6 | 01411 |
Supersedes
This item replaces cancelled NIIN 011033299. An older drawing citing one of those numbers resolves here.