NSN 5315-01-177-9877 · NIIN 011779877 · FSC 5315
NO DASHES 5315011779877
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.680 |
| AATR | SHANK LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.520 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.250 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.434 AND INCHES MAXIMUM 0.435 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.760 AND INCHES MAXIMUM 2.780 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.050 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.190 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.4375 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.619 AND INCHES MAXIMUM 0.620 |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 30.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 1.501 |
| FEAT | SPECIAL FEATURES | SHOULDER HAS TWO FLATS 1.125 IN. ACROSS; FACE OF SHOULDER SERRATED |
| MATT | MATERIAL | OVERALL STEEL COMP XM-12 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 90338-6 | 83549 |