NSN 5315-01-179-3807 · NIIN 011793807 · FSC 5315
NO DASHES 5315011793807
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.4353 AND INCHES MAXIMUM 0.4363 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.410 |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 1.625 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.130 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.114 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.195 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.060 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C NOMINAL 27.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 0.660 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 63.0 |
| HGTH | HEIGHT | INCHES NOMINAL 0.125 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-N-286 CL A,COLD DRAWN |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL LUBRICANT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-L-8937 |
| STYL | STYLE DESIGNATOR |