NSN 5315-01-182-8442 · NIIN 011828442 · FSC 5315
NO DASHES 5315011828442
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.530 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.825 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.250 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.400 AND INCHES MAXIMUM 0.401 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.560 AND INCHES MAXIMUM 2.580 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.050 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.190 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.437 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.434 AND INCHES MAXIMUM 0.435 |
| CRDY | FIRST END LOCATION | LONG END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 30.0 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.520 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-12 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5659 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 90570 | 83549 |