NSN 5315-01-190-4814 · NIIN 011904814 · FSC 5315
NO DASHES 5315011904814
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.330 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.301 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.500 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2486 AND INCHES MAXIMUM 0.2495 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.024 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.130 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.050 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| CRDY | FIRST END LOCATION | UNTHREADED END |
| CSYM | SURFACE FINISH | UNTHREADED END MICROINCHES 32.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.623 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S4967 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |