NSN 5315-01-190-4815 · NIIN 011904815 · FSC 5315
NO DASHES 5315011904815
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES NOMINAL 3.300 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.4967 AND INCHES MAXIMUM 0.4979 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.460 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.319 |
| ABRD | SECOND HOLE DIAMETER | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.130 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 3.815 |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | INCHES NOMINAL 0.465 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.060 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.400 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | SMALL END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 32.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES MINIMUM 14.0 AND DEGREES MAXIMUM 16.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 75A732353-2005 | 76301 |
| 75A732383-2005 | 06651 |
| 75A732383-2005 | 0AUA3 |
| 75A732383-2005 | 12829 |
| 75A732383-2005 | 14248 |