NSN 5315-01-254-0225 · NIIN 012540225 · FSC 5315
NO DASHES 5315012540225
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.405 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.718 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.125 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.341 AND INCHES MAXIMUM 1.345 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.030 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.252 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| CRDY | FIRST END LOCATION | CHAMFERED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSGL | SECOND END TIP RADIUS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 0.498 AND INCHES MAXIMUM 0.502 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M943E4-5-4 | 56878 |
| 11415E4-5-4 | 59563 |
| 3M943E4-5-4 | 73197 |
| 3M943E4-5-4 | 76301 |
| 3M943E4-5-4 | 92215 |
| 3M943E4-5-4 | L4528 |
| 3M943E4-5-4 | 06725 |