NSN 5315-01-266-2625 · NIIN 012662625 · FSC 5315
NO DASHES 5315012662625
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.120 |
| ABMZ | DIAMETER | INCHES MINIMUM 1.112 AND INCHES MAXIMUM 1.115 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 3.624 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.055 AND INCHES MAXIMUM 1.063 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.060 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.060 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.120 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | CHAMFERED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 15.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35,TY 1 |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JAC-10466-011 | 58905 |
| 76Z5769-15 | 95310 |
| 76Z5769-15 | 98523 |
| JCM-10466-011 | D9182 |
| 76Z5769-15 | 0DHG4 |