NSN 5315-01-275-8484 · NIIN 012758484 · FSC 5315
NO DASHES 5315012758484
In Stock
PIN,HOLLOW
Nails, Machine Keys, and Pins
Technical characteristics
9 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.780 |
| ACHT | PIN OVERALL LENGTH | INCHES NOMINAL 3.635 |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.9692 AND INCHES MAXIMUM 0.9708 |
| CRTL | CRITICALITY CODE JUSTIFICATION | SUPP |
| FEAT | SPECIAL FEATURES | TWO RAISED LIPS 0.080 IN. HIGH BY 0.220 IN. WIDE 180 DEGREES APART |
| MATT | MATERIAL | OVERALL STEEL COMP 300M |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S-6257 OR ASSN STD 2ND MATERIAL RESPONSE A-S-6419 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| SUPP | SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT,SURFACE FINISH,OR MATERIAL TYPE AND SPECIAL INSPECTION REQUIREMENTS SUCH AS MAGNETIC PARTICLE INSPECTION OR FLUORESCENT PENETRANT INSPECTION |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2007405-35 | 1K556 |
| 2007405-35 | 2V343 |
| 2007405-35 | 2M490 |
| 2007405-35 | 34087 |
| 2007405-35 | 36164 |
| 2007405-35 | 4JZH8 |
| 2007405-35 | 52848 |
| 2007405-35 | 66841 |
| 2007405-35 | 6K4C8 |
| 2007405-35 | 6Z056 |
| 5315PL0849713 | 9009H |
| 2007405-35 | 13002 |
| 2007405-35 | 17576 |