NSN 5315-01-294-0894 · NIIN 012940894 · FSC 5315
NO DASHES 5315012940894
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.600 AND INCHES MAXIMUM 0.620 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.745 AND INCHES MAXIMUM 1.775 |
| ABPR | FIRST STEP DIAMETER | INCHES MINIMUM 0.433 AND INCHES MAXIMUM 0.435 |
| ABPS | FIRST STEP LENGTH | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.045 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.525 |
| ABPU | SECOND STEP LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| ABPV | THIRD STEP DIAMETER | INCHES MINIMUM 0.349 AND INCHES MAXIMUM 0.350 |
| ABPW | THIRD STEP LENGTH | INCHES NOMINAL 0.310 |
| AKTX | FIRST END COUNTERBORE DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| AKTZ | FIRST END COUNTERBORE DEPTH | INCHES MINIMUM 0.770 AND INCHES MAXIMUM 0.830 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.040 AND INCHES MAXIMUM 0.060 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | COUNTERBORE END |
| CTHC | SECOND END TAPER ANGLE | DEGREES MINIMUM 28.0 AND DEGREES MAXIMUM 32.0 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY |
| STYL | STYLE DESIGNATOR |