NSN 5315-01-300-6455 · NIIN 013006455 · FSC 5315
NO DASHES 5315013006455
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.798 |
| ABPS | FIRST STEP LENGTH | INCHES NOMINAL 0.250 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.7485 AND INCHES MAXIMUM 0.7491 |
| ABPU | SECOND STEP LENGTH | INCHES NOMINAL 3.332 |
| ABPV | THIRD STEP DIAMETER | INCHES NOMINAL 0.625 |
| ABPW | THIRD STEP LENGTH | INCHES NOMINAL 0.798 |
| AKTY | SECOND END COUNTERBORE DIAMETER | INCHES NOMINAL 0.625 |
| AKVA | SECOND END COUNTERBORE DEPTH | INCHES NOMINAL 0.400 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.060 |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.060 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.625 |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CTYQ | FIRST STEP WIDTH ACROSS FLATS | INCHES NOMINAL 0.880 |
| FEAT | SPECIAL FEATURES | HOLE THRU LONGITUDINAL CENTER 0.185 IN. MIN. DIA. 0.190 IN. MAX. DIA.,1.500 IN. DEEP; SECOND SHANK HAS A HOLE 0.125 1N. DIA. 0.440 IN. DEEP ALONG AXIAL WHICH IS INTERCEPTIVE BY FIRST HOLE |
| MATT | MATERIAL | OVERALL STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 296400CA CAGEC 06889 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 402291 | 06889 |