ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5315-01-311-6407
NSN 5315-01-311-6407  ·  NIIN 013116407  ·  FSC 5315
NO DASHES 5315013116407
In Stock

PIN,SHOULDER,HEADLESS

Nails, Machine Keys, and Pins

Technical characteristics

22 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAGZFIRST END STYLE
AAHPSECOND END STYLE
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTHINCHES NOMINAL 0.405
AATRSHANK LENGTHINCHES NOMINAL 0.655
AAVJSHOULDER WIDTH ACROSS FLATSINCHES NOMINAL 0.438
AAZESHANK DIAMETERINCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.295
ABHPOVERALL LENGTHINCHES NOMINAL 2.030
AMFMSECOND END TAPER LENGTHINCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270
CQBBSECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
CQJXNOMINAL THREAD SIZEINCHES 0.250
CQTRSECOND SHANK DIAMETERINCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495
CRDYFIRST END LOCATIONSQUARE END
CSGLSECOND END TIP RADIUSINCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090
CWASSECOND SHANK LENGTHINCHES NOMINAL 1.250
MATTMATERIALOVERALL STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONOVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-S-763,COND B OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-763,COND B OR MFR REF 3RD MATERIAL RESPONSE --S265,CAGEC 76301
SFTTSURFACE TREATMENTOVERALL PASSIVATE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONOVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35
STYLSTYLE DESIGNATOR
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)

Cross-references

11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
3M943C4-4-1656878
11415C4-4-1659563
3M943C4-4-1660516
3M943C4-4-1673197
3M943C4-4-1676301
AAP139C4-4-1684256
VS3258C4-4-1692215
D792683C4N1697928
3M943C4-4-16L4528
3M943C4-4-1606725
D792683C4N1617446