NSN 5315-01-313-8744 · NIIN 013138744 · FSC 5315
NO DASHES 5315013138744
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.375 |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.375 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.626 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.298 AND INCHES MAXIMUM 0.308 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.113 AND INCHES MAXIMUM 0.128 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.191 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.076 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.9980 AND INCHES MAXIMUM 0.9985 |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | SHOULDER OUTSIDE DIAMETER MICROINCHES 16.0 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 1.800 AND INCHES MAXIMUM 1.805 |
| MATT | MATERIAL | OVERALL STEEL UNS K23080 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6411 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 75A650006-2005 | 6Z056 |
| 75A650006-2005 | 76301 |
| 75A650006-2005 | 0PXV4 |
| 75A650006-2005 | 0C1D0 |
| 75A650006-2005 | 14248 |