NSN 5315-01-342-1741 · NIIN 013421741 · FSC 5315
NO DASHES 5315013421741
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Application: 3IN SWING CHECK VALVE
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.935 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.750 |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.380 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.250 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES NOMINAL 0.410 |
| ABRD | SECOND HOLE DIAMETER | INCHES NOMINAL 0.410 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.4375 |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | INCHES NOMINAL 2.375 |
| AGAV | END ITEM IDENTIFICATION | 3IN SWING CHECK VALVE |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.190 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQTR | SECOND SHANK DIAMETER | INCHES NOMINAL 0.380 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.935 |
| MATT | MATERIAL | OVERALL STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- A564 |
| STYL | STYLE DESIGNATOR | |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7662-001-072 | 57574 |
| 73811-130/7662-001-072 | 57574 |
| 7662-001-072VM | D9182 |
| 7662-001-072VM | 03950 |
| 73811-130/7662-001-072VM | 03950 |