NSN 5315-01-356-1595 · NIIN 013561595 · FSC 5315
NO DASHES 5315013561595
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.325 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.480 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.900 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.108 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.140 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.050 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 31.0 AND ROCKWELL C MAXIMUM 39.0 |
| CQTR | SECOND SHANK DIAMETER | INCHES NOMINAL 0.365 |
| CRDY | FIRST END LOCATION | CHAMFERED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 60.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.505 |
| MATT | MATERIAL | OVERALL STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 101362-1 | 54786 |