NSN 5315-01-686-2914 · NIIN 016862914 · FSC 5315
NO DASHES 5315016862914
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Application: HOIST CYLINDER ASSEMBLY
Technical characteristics
7 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SPCL | SPECIAL TEST FEATURES | WEIGHTS NOT TO EXCEED 210 KG; STROKE: 2285 MM; VIBRATION: THE HOIST CYLINDER ASSEMBLED AS UMM SHALL WITHSTAND WITHOUT DEGRADATION THE VIBRATION SPECIFIED IN MIL-STD-167-1, TYPE I, TABLE II; THE HOIST CYLINDER SUBASSEMBLY WITH THE SENSOR GROUP INSTALLED HAS THE FOLLOWING CHARACTERISTICS AT A NOMINAL OPERATING PRESSURE OF 9722 KPA (1410 PSIG);RAISE CYCLE: THE RATE OF TRAVEL FOR THE PISTON ROD DOES NOT EXCEED A RATE OF 30.48 CM/S (1 FOOT/SEC); THE INLET AND OUTLET PRESSURE IS 9722 KPA (1410 PSIG); THE OVERALL TIME REQUIRED FOR BASIC RAISE CYCLE DOES NOT EXCEED 22 SECONDS; LOWER CYCLE: THE RATE OF TRAVEL FOR THE PISON ROD DOES NOT EXCEED A RATE OF 30.48 CM/S (1 FOOT/SEC); THE INLET PRESSURE IS 9722 KPA (1410 PSIG) AND THE OUTLET PRESSURE IS 552 KPA (80 PSIG); OVERALL TIME REQUIRED FOR THE LOWER CYCLE DOES NOT EXCEED 22 SECONDS;START AND STOP OF RAISED AND LOWERED CYCLE IS DAMPED TO MEET A MAXIMUM OF 0.2G ACCELERATION |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | METERING PIN |
| SUPP | SUPPLEMENTARY FEATURES | THE HOIST CYLINDER SUBASSEMBLY IS CAPABLE OF OPERATING AT A SHIP SYSTEM HYDRAULIC PRESSURE OF 9722 KPA (1410 PSIG) NOMINAL; 7722 KPA (1120 PSIG) MINIMUM AND 11.89 MPA (1725 PSIG) MAXIMUM; THE HOIST CYLINDER IS CAPABLE OF WITHSTANDING A HYDROSTAIC TEST PRESSURE OF 33.96 MPA (4925 PSIG); THE HOIST CYLINDER SUBASSEMBLY IS DESIGNED WITH AN INTERNAL VENT VALVE THAT ALLOWS FOR SELF-VENTING OF THE HOIST CYLINDER; THE HOIST CYLINDER SUBASSEMBLY IS CAPABLE TO WITHSTAND TO EXTERNAL HYDRO PRESSURE OF 7585 KPA (1100 PSIG) |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| FEAT | SPECIAL FEATURES | MATERIAL: STAINLESS STEEL UNS S32760 |
| AGAV | END ITEM IDENTIFICATION | HOIST CYLINDER ASSEMBLY |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8603386 | 34228 |
| 8603386-D1430452 | 34228 |
| 8603386 | 53711 |
| 7377582-44 | 53711 |
| 582-7377582 | 53711 |