NSN 5315-01-718-3191 · NIIN 017183191 · FSC 5315
NO DASHES 5315017183191
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP E4340 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN DIAMOND LOCATING |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 30.0 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 0.93 AND INCHES MAXIMUM 0.95 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.940 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.070 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.070 |
| ABPF | SECOND UNDERCUT DIAMETER | INCHES NOMINAL 0.940 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.06 |
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.80 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.44 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 1.006 AND INCHES MAXIMUM 1.007 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.12 |
| STYL | STYLE DESIGNATOR | |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S-S-5000 COND-E |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CRDY | FIRST END LOCATION | SHORT SHANK END |
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.28 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 1.059 AND INCHES MAXIMUM 1.060 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8840300 | 53711 |
| 342-8840300-61 | 53711 |
| R7743002-61 | 96169 |
| LOA043266-61 | 96169 |